Product Description
Class D Monoblock Subwoofer Amplifier *
High-Damping Class D Circuit with discrete control circuitry *
Differential-Balanced Input Topology: 1 pair of inputs *
On-board Crossover: Fully-variable (40 - 200 Hz), selectable-slope (12 or 24 dB per octave) LP *
Bass EQ: Single-band parametric with variable boost up to +15dB and Remote Bass Option *
Preamp Output: 2-channel (independent active filter, parallel with amplifier filter or pass through) *
Output Polarity Reversal: Switch permits instant output polarity reversal *
Infrasonic Filter: Fully-variable 24dB/octave from 15-60 Hz *
Dual mono speaker output connections: Accept up to 8 AWG wire *
+12V and Ground connections: Accept 4 AWG wire (required) *
Rated Power: 1000 W RMS @ 1.5 ohm - 4 ohm (11V-14.5V) *
THD at Rated Power: <0.05% @ 4 ohm *
S/N Ratio: >95dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) *
Frequency Response: 5 Hz - 200 Hz (+0, -1dB) *
Damping Factor: >500 @ 4 ohm / 50 Hz *
Input Range: Switchable from 200mV-2V RMS to 800mV-8V RMS *
Dimensions (L x W x H): 19.70 x 9.25 x 2.36 in; 500 x 235 x 60 mm
Product Features
- Class D Monoblock Subwoofer Amplifier
- High-Damping Class D Circuit with discrete control circuitry
- Differential-Balanced Input Topology: 1 pair of inputs
- On-board Crossover: Fully-variable (40 - 200 Hz), selectable-slope (12 or 24 dB per octave) LP
- Bass EQ: Single-band parametric with variable boost up to +15dB and Remote Bass Option
Technical Details
- Preamp Output: 2-channel (independent active filter, parallel with amplifier filter or pass through)
- Output Polarity Reversal: Switch permits instant output polarity reversal
- Infrasonic Filter: Fully-variable 24dB/octave from 15-60 Hz
- Dual mono speaker output connections: Accept up to 8 AWG wire; +12V and Ground connections: Accept 4 AWG wire (required)
- Rated Power: 1000 W RMS @ 1.5 ohm - 4 ohm (11V-14.5V)
- THD at Rated Power: <0.05% @ 4 ohm; Frequency Response: 5 Hz - 200 Hz (+0, -1dB)
- S/N Ratio: >95dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor: >500 @ 4 ohm / 50 Hz
- Input Range: Switchable from 200mV-2V RMS to 800mV-8V RMS
- Dimensions (L x W x H): 19.70 x 9.25 x 2.36 in; 500 x 235 x 60 mm
|
Code: 1000/1V2
